Strapping machines · Arch size and minimum package, strap width and thickness, tension range, strapping speed, heat sealing and warm-up, power, noise, pallet and coil versions
A strapping machine is an end-of-line packaging machine with a strap feed and tensioning head, an arch or lance that guides the strap around the load, and a heat, friction or seal joint that closes it, used to bundle boxes, printed matter, pallets, coils and pipes with plastic or steel strap. Ask three things first: the size and weight of the packages and how many straps per minute you need, which strap material, width and thickness it must run, and what tension and sealing method secure your load.
Semi-automatic and automatic arch strapping machines, pallet strappers and coil and pipe strapping machines using plastic or steel strap. Hand strapping tools sold alone, strap itself, stretch wrappers and carton sealers are outside this page.
01
Cyklop's Ampag CI 71 automatic strapping machine specification lists an inner arch of 850 × 600 mm (width × height), a working table height of 820 mm, strap widths of 9, 10, 12 or 16 mm at 0.6–1.0 mm thickness, coils of 200–210 mm inner and 400–450 mm outer diameter, and a strapping speed of up to 30 strappings per minute, with PLC and driver-board control, a brushless DC motor and a single-phase 220–240 V, 0.85 kW supply. [1]
Its entry-level CI 70 takes 9 or 12 mm polypropylene strap, with automatic strap loading, a strap-end sensor and a minimum package size of 130 × 20 mm (length × width); it weighs about 220 kg and operates from 5 to 40 °C. [2]
For pallets, the semi-automatic M-Pac HE straps horizontally with 12 or 15.5 mm PP strap, a minimum package height of about 170 mm, a machine height of 2,830 mm and about 160 kg weight, running on 230 V or battery; Cyklop describes it as for low daily volumes. [3]
Editorial calculation: at 30 straps per minute a strap takes 2 s; a carton needing two straps, with an assumed 2 s to reposition, would take about 6 s, or about 10 cartons per minute. Base line speed on straps per package, not on the machine's maximum strap rate. [1]
Give the supplier the package or pallet dimensions and weight range, number and position of straps, throughput required, strap material (PP, PET, steel), width and thickness, tension needed, sealing method, feeding (manual, conveyor, inline), power supply, noise limit, environment (temperature, dust, washdown) and quantities.
02
The CI 71 offers adjustable tension from 50 to 800 N with an arm-type tensioning system; the CI 70 offers 70–450 N with electronic tension adjustment, hot-seal sealing with variable welding time, about one minute of warm-up and 83 dB(A) noise; the M-Pac HE applies up to 690 N with heat sealing after about 30 s of warm-up. [1] [2] [3]
Editorial calculation: 800 N corresponds to the weight of about 82 kg (800 ÷ 9.81) and 450 N to about 46 kg. Ask the supplier for the joint strength of the seal on your strap, since the tension the machine applies is only useful if the joint holds it.
Editorial note: delicate products need low, adjustable tension; heavy bundles need higher tension and a strap whose break strength exceeds it with margin. Ask suppliers to test-strap your packages.
03
StraPack's product pages describe two ways its machines tension strap. The SQ-800 automatic arch machine, driven by a brushless DC motor, has a standard strapping rate of 55 straps per minute which StraPack says holds even when tension is applied, is ready to run in under 25 seconds from start-up, and offers selectable tensioning modes set on a digital tension dial, with tension up to 80 kgf (176 lbf), equivalent to a 150 mm (6 in) strap stroke. The semi-automatic iQ-400 offers dual tension modes switched by hand: torque tension for stronger tension and for compressible packages, and stroke tension for soft tension or quick operation. It has fewer moving parts, keeps its electrical parts in one enclosed side cabinet, and is described as quiet enough for office use. [4] [5]
Editorial calculation: 80 kgf is about 785 N, close to the 800 N top of the CI 71's range on this page; 55 straps per minute is about 1.1 s per strap against 2 s at 30 per minute. Ask a supplier to state cycle rate at the tension you will use, which tension mode suits a compressible or fragile pack, and the strap width and grade the machine needs at that tension. [4] [1]
| Item | Published value | Compare with |
|---|---|---|
| Strapping rate | 55 straps/min, with tension (SQ-800) [4] | Up to 30/min (CI 71) [1] |
| Maximum tension | 80 kgf / 176 lbf (SQ-800) [4] | 50–800 N (CI 71) [1] |
| Start-up | Ready in under 25 s (SQ-800) [4] | Shift start routine. |
| Tension modes | Torque or stroke (iQ-400) [5] | Compressible vs rigid packs. |
04
Suppliers linked to this page list strapping machines; each card links to the page reviewed.
Listings include automatic and PP strapping machines, pallet strappers, mini spot strappers, coil, tube and wire strapping machines and end-of-line packaging lines.
05
This is a functional reference built from the sources cited; it is not one maker's design.
| Part | Role | Fix in the order |
|---|---|---|
| Arch or lance | Guides strap round the load. [1] [3] | Arch size or pallet height. |
| Strap feed and dispenser | Feeds strap from coil. [2] | Coil size; auto loading. |
| Tensioning unit | Tightens the strap. [1] | Tension range and type. |
| Sealing head | Heat-seals the joint. [2] | Method and weld time. |
| Control | PLC or electronic control. [1] | Controls and interfaces. |
| Frame and table | Supports packages. [1] | Table height; castors. |
06
A strapping machine quotation needs values for your line. The table explains each field, gives published values where a reviewed source states them, and says what to obtain from the supplier.
| Field | What it means and published values | Ask the supplier for |
|---|---|---|
| Strapping Speed (straps/min) | Up to 30 or 55 in arch machines. [1] [4] | Rate on your package. |
| Strap Width (mm) | 9–16 mm in one machine. [1] | Widths supported. |
| Strap Thickness (mm) | 0.6–1.0 mm in one machine. [1] | Thickness range. |
| Tension Force (N) | 50–800 N; 70–450 N; up to 690 N. [1] [2] [3] | Range and adjustment. |
| Sealing Method | Heat seal in three models. [2] [3] | Method and joint strength. |
| Power Supply (V AC) | 220–240 V single-phase. [1] | Supply. |
| Power Consumption (kW) | 0.85 kW in one machine. [1] | Power. |
| Operating Pressure (MPa) | Pneumatic versions only. | Air pressure if used. |
| Noise Level (dB(A)) | 83 dB(A) in one machine. [2] | Noise and method. |
| Machine Weight (kg) | About 160–220 kg in two machines. [2] [3] | Weight. |
| Dimensions (L×W×H) (mm) | Arch 850 × 600 mm inner. [1] | Drawing. |
| Operating Temperature (°C) | 5–40 °C in one machine. [2] | Range. |
| IP Rating | Washdown needs. | IP code. |
07
Paste it into your enquiry below or into an email to a maker, then replace every bracket.
Package: [size; weight; straps per package] Throughput: [packages per minute] Strap: [material; width; thickness] Tension: [N; product sensitivity] Sealing: [heat; friction; seal] Supply: [power; feeding; environment; quantity]
These companies list strapping machines.
Lists PP strapping machines and pallet strapping machines among packaging machines.
Product scope checked 2026-10-11
Lists automatic strapping machines and steel coil, tube and wire strapping machines.
Product scope checked 2026-10-11
Lists strapping machines and carton sealer and strapping combinations.
Product scope checked 2026-10-11
Lists strapping machines among end-of-line packaging equipment.
Product scope checked 2026-10-11
Lists strapping machines among palletising and filling machines.
Product scope checked 2026-10-11
Lists coil strapping machines among steel pipe handling equipment.
Product scope checked 2026-10-11
Lists mini spot strapping machines alongside strapping tools.
Product scope checked 2026-10-11
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Cyklop's Ampag CI 71 is rated up to 30 strappings per minute. [1]
The reviewed Cyklop machines range from 50–800 N (CI 71) and 70–450 N (CI 70) to 690 N (M-Pac HE). [1] [2] [3]
Yes; Cyklop lists about one minute for the CI 70 and about 30 seconds for the M-Pac HE. [2] [3]
One maker states its automatic arch machine keeps a 55 straps per minute rate even with tension applied, with tension up to 80 kgf (176 lbf). [4]
Sources checked 2026-10-12. Cyklop publishes specifications for its own strapping machines; values for your machine must come from the supplier's specification and test strapping.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
Compare manufacturer profiles with relevant product and process capability.