INDUSTRY COMPONENT

Fluid Nozzle

A precision-engineered component that controls and directs fluid flow in spray applications.

Component Specifications

Definition
A fluid nozzle is a critical component in spray systems that atomizes, meters, and directs liquids or gases through an orifice. It converts fluid pressure into kinetic energy to create specific spray patterns (cone, fan, hollow cone, flat) with controlled droplet size distribution. Used in coating, cooling, cleaning, lubrication, and chemical processing applications where precise fluid delivery is essential.
Working Principle
Operates on Bernoulli's principle and fluid dynamics: pressurized fluid enters the nozzle chamber, accelerates through a constricted orifice, and exits as a controlled spray pattern. Internal geometry (orifice shape, swirl chambers, deflectors) determines atomization quality, flow rate, and spray angle. Pressure drop across the nozzle converts potential energy to kinetic energy.
Materials
Stainless steel (304/316), brass, hardened steel, tungsten carbide, ceramic (alumina, silicon carbide), PTFE, PVDF. Material selection depends on fluid compatibility, abrasion resistance, and temperature requirements.
Technical Parameters
ParameterTypical rangeNotes & selection driver
Flow Rate0.1-100 L/min at 3 bar
Spray Angle15-120 degrees
Droplet Size10-500 microns
Pressure Range1-100 bar
Connection TypeNPT, BSP, quick-connect
Orifice Diameter0.1-10 mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards
DIN 11851, ASME B1.20.1

Parent Products

This component is used in the following industrial products

Engineering Analysis

Risks & Mitigation
  • Clogging from particulate contamination
  • Erosion wear from abrasive fluids
  • Chemical corrosion
  • Pressure-induced failure
  • Improper spray pattern affecting product quality
FMEA Triads
Trigger: Abrasive particles in fluid
Failure: Orifice enlargement leading to increased flow rate and poor atomization
Mitigation: Install upstream filtration, use hardened materials (tungsten carbide), implement regular inspection schedule
Trigger: Chemical incompatibility
Failure: Corrosion and material degradation
Mitigation: Material compatibility testing, protective coatings, scheduled replacement based on service life

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance
±2% flow rate variation, ±5% spray angle deviation
Test Method
ISO 9001 quality system, flow rate calibration per manufacturer specs, spray pattern analysis using laser diffraction

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation
Request current drawings, revision history, and a signed specification sheet.
Manufacturing capability
Verify equipment lists, process limits, capacity, and representative production evidence.
Inspection readiness
Confirm test methods, calibrated equipment, sampling plans, and traceable reports.
Supplier transparency
Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Fluid Nozzle

3 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.

CYCO Nozzles
Guangdong, CN
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “Adjustable Two-Fluid Nozzle”
View source page ↗ cyco-nozzles.com · recorded 2026-09-02
Dongguan Mistec Spraying
Guangdong, CN
Also makes: Atomizing Nozzle, Spray Nozzle, Nozzle Head and 2 more
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “Siphon Type Two Fluid Nozzle fo...”
View source page ↗ nozzlespray.com · recorded 2026-08-26
Dongguan ST Cooling Spray Technologies Co., Ltd.
Guangdong, CN
Also makes: Atomizing Nozzle, Spray Nozzle, Fuel Nozzle and 4 more
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “Full Cone Two Fluid Nozzles”
View source page ↗ stspray.com · recorded 2026-08-29

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Related Components

Chrome Plating
Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.
Upper Tool (Punch)
Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.
Main Frame
The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.
Shaft Bearing
Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What factors affect nozzle spray pattern consistency?

Orifice wear, pressure fluctuations, fluid viscosity changes, contamination buildup, and improper alignment. Regular maintenance and monitoring of operating parameters are essential.

How do I select the right nozzle material for corrosive fluids?

Choose corrosion-resistant materials like 316 stainless steel for mild acids, PVDF for strong acids, or ceramic for abrasive corrosive mixtures. Always verify chemical compatibility charts.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification
This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Request Manufacturing Insight for Fluid Nozzle

Thank you. Your request has been sent. We'll respond within 1–3 business days.
Sorry, we couldn't send your message. Please try again, or email us at [email protected].
Flow Channels Fluid Port
Get QuotesChat