This page explains how Solar Wall Lights is classified within Electrical Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
Outdoor lighting fixtures that mount on walls and operate using solar energy converted to electricity.
Technical details and manufacturing context for Solar Wall Lights
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Luminous FluxRequired | 300–800 lumens | Total visible light emitted by the LED sourceIES LM-79 |
| Battery CapacityRequired | 1500–3000 mAh | Energy storage capacity of the rechargeable battery |
| Solar Panel PowerRequired | 2–5 watts | Maximum power output of the photovoltaic panel |
| Illumination DurationRequired | 8–12 hours | Maximum operating time on full battery charge |
| IP RatingRequired | IP54–IP65 IPXX | Ingress Protection rating for dust and water resistanceIEC 60529 |
| Motion Sensor Range | 3–8 meters | Maximum detection distance for motion-activated models |
| Color Temperature | 3000–6500 K | Warm white to daylight |
| Charging Time | 6–8 h | Full sun exposure |
| Operating Temperature | -20–50 °C | Battery performance degrades outside |
| Material | ADC12 | Die-cast aluminum housingASTM B85 |
| Weight | 0.8–1.5 kg | Per unit |
| Dimensions | 150–300 mm | Length × width × height |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
Commonly used trade names and technical identifiers for Solar Wall Lights.
| pressure: | Atmospheric only |
| other spec: | Solar irradiance: 200-1000 W/m², IP65 rating, 8-12 hours illumination per charge |
| temperature: | -20°C to 50°C |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
Manufacturer profiles associated with Solar Wall Lights.
Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.
A practical evidence checklist for RFQ preparation and supplier evaluation.
CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.
Typical specifications include luminous flux of 300-800 lumens, battery capacity of 1500-3000 mAh, solar panel power of 2-5 watts, illumination duration of 8-12 hours, IP rating of IP54-IP65, motion sensor range of 3-8 meters, color temperature of 3000-6500 K, charging time of 6-8 hours, operating temperature of -20°C to 50°C, and weight of 0.8-1.5 kg. These are reference ranges; verify the specific model with the manufacturer.
Photovoltaic cells convert sunlight into electricity during the day, charging a rechargeable battery via a charge controller. At dusk, a light sensor activates the LED array using stored energy. Some models have motion sensors that increase brightness when movement is detected, then return to standby or turn off after a delay.
Regularly clean the photovoltaic panel and lens to remove dust and debris. Check for any damage to the housing or seals. If illumination duration decreases, the battery may need replacement. Always follow the manufacturer's maintenance guidelines.
Confirm the specific model's luminous flux, battery capacity, solar panel power, IP rating, motion sensor range, and operating temperature range with the legal manufacturer or supplier. Ensure the product meets your application's requirements and that any standards listed are used as procurement references, not as proof of certification.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
Compare manufacturer profiles with relevant product and process capability.