Medical Device Components
View system integration details
This page explains how Fluid Control Valve is classified within Machinery and Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
A precision valve designed to regulate, direct, or control the flow of fluids (liquids, gases, or medical solutions) within medical devices.
Technical details and manufacturing context for Fluid Control Valve
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Nominal Diameter | 2–50 mm | Common sizes for medical fluid control.ISO 6708 |
| Operating Pressure | 0.1–1.0 MPa | |
| Flow Coefficient (Cv) | 0.01–5.0 Cv | Determines flow capacity at given pressure drop.IEC 60534-2-3 |
| Leakage Rate | ≤0.01 % of rated Cv | Class VI shutoff for bubble-tight sealing.ISO 5208 |
| Operating Temperature | -10–80 °C | Outside range may affect seal integrity.ISO 5211 |
| Response Time | 10–50 ms | Critical for precise dosing in medical devices.IEC 60534-4 |
| Control Accuracy | ±1.0 % of span | Ensures precise flow regulation.IEC 60534-4 |
| Supply Voltage | 24 ±10% V DC | Standard for medical device actuators.IEC 61131-2 |
| Power Consumption | 2–10 W | Low power for portable devices.IEC 60534-4 |
| Ingress Protection | IP54–IP65 | Protection against dust and water jets.IEC 60529 |
| Body Material | 316L SS | Corrosion-resistant for medical fluids.ASTM A240 |
| Seal Material | PTFE/EPDM | Chemical compatibility and temperature range.ASTM D2000 |
| Weight | 0.2–5.0 kg | Affects portability and mounting. |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
| pressure: | 0 to 10 bar (150 psi) |
| flow rate: | 0.1 to 50 L/min |
| temperature: | -20°C to 120°C |
| slurry concentration: | Not recommended for slurries above 5% solids by volume |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
A practical evidence checklist for RFQ preparation and supplier evaluation.
Compare the published product scope and source details, then include your specifications and quantity in an enquiry.
3 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.
The official stainless steel head angle seat valve page describes the angle seat design with high flow and low resistance, with pneumatic actuator, for on/off or control of liquids, gases and steam in food, beverage, pharmaceutical and chemical uses; the About page on the same domain describes a solenoid and solenoid valve manufacturer founded in 1991 with a 40,000 m² site in Fenghua, Ningbo and about 450 employees. Confirm size, pressure and temperature from the model datasheet.
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
This valve is used in medical devices such as infusion pumps, dialysis machines, anesthesia delivery systems, and diagnostic equipment. It precisely manages fluid flow rates, pressure, and direction to ensure accurate dosing and patient safety.
Common body materials include medical-grade stainless steel (e.g., 316L) and medical-grade plastics. Seal materials often include PTFE (polytetrafluoroethylene) and EPDM. Ceramic may also be used for certain components. Always verify material compatibility with the specific fluid and application.
Relevant standards include ISO 6708 for nominal diameter, ISO 5208 for pressure and leakage, IEC 60534-2-3 for flow coefficient, IEC 60534-4 for response time and control accuracy, IEC 61131-2 for supply voltage, IEC 60529 for ingress protection, ASTM A240 for body material, and ASTM D2000 for seal material. Confirm compliance with the manufacturer.
Consider required flow rate, pressure range, response time, control accuracy, and compatibility with the fluid. Review the technical parameters listed in the directory and verify them with the manufacturer for your specific application. Also consider environmental factors like temperature and ingress protection.
This component is essential for the following industrial systems and equipment:
Commonly used trade names and technical identifiers for Fluid Control Valve.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Compare manufacturer profiles with relevant product and process capability.