Hydraulic Tilt Mechanism
View system integration details
This page explains how Pivot Assembly is classified within Machinery and Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
A mechanical assembly that provides a rotational connection point within the hydraulic tilt mechanism, allowing controlled angular movement.
Technical details and manufacturing context for Pivot Assembly
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Rated Load Capacity | 50–200 kN | Maximum axial load at rated pressure |
| Tilt Angle Range | -15–15 ° | Full angular travel for tilt mechanism |
| Rotational Speed | 0–30 r/min | Maximum continuous rotation speed |
| Operating Temperature | -40–85 °C | Non-operating temperature range is wider |
| Seal Material | NBR | Nitrile rubber for hydraulic oil compatibilityASTM D2000 |
| Bearing Type | 6205 | Deep groove ball bearingISO 15 |
| Weight | 5–15 kg | Depends on size and material |
| IP Rating | IP65 | Dust-tight and protected against water jetsIEC 60529 |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
| pressure: | Up to 300 bar (4350 psi) |
| flow rate: | Not applicable (static rotational component) |
| temperature: | -40°C to 120°C |
| slurry concentration: | Not applicable (sealed assembly) |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
A practical evidence checklist for RFQ preparation and supplier evaluation.
Compare the published product scope and source details, then include your specifications and quantity in an enquiry.
Manufacturer profiles associated with Pivot Assembly.
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
The pivot assembly provides a rotational connection point, allowing controlled angular movement of equipment sections. It transfers hydraulic force into angular motion, enabling tilting.
Key specifications include rated load capacity, operating pressure, tilt angle range, rotational speed, operating temperature, bearing type, seal material, IP rating, and weight. Always confirm these with the manufacturer for your specific model.
Common materials include alloy steel for structural components and bronze for bearing surfaces. The seal material is typically nitrile rubber (NBR) for hydraulic oil compatibility.
Standards such as ISO 15 for bearings, ASTM D2000 for seal material, and IEC 60529 for IP rating are references. Verify actual compliance with the manufacturer or supplier.
This component is essential for the following industrial systems and equipment:
Commonly used trade names and technical identifiers for Pivot Assembly.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Compare manufacturer profiles with relevant product and process capability.