Concrete Distribution System
View system integration details
This page explains how Transverse Spreading Auger/Plow is classified within Machinery and Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
A mechanical component in concrete distribution systems that spreads and levels concrete horizontally across the working surface.
Technical details and manufacturing context for Transverse Spreading Auger/Plow
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Working Width | 2000–6000 mm | Determines the coverage area per pass. |
| Screw Diameter | 200–400 mm | Affects material flow and spreading efficiency. |
| Screw Speed | 30–120 r/min | Higher speed increases spreading rate but may cause segregation. |
| Spreading Capacity | 50–200 m³/h | Maximum volume of concrete that can be spread per hour. |
| Leveling Accuracy | ±5 mm | Tolerance for surface flatness after leveling. |
| Hydraulic Flow Rate | 40–100 L/min | Required for driving the auger and plow. |
| Power Requirement | 7.5–30 kW | Depends on width and capacity. |
| Operating Temperature | -10–50 °C | Outside this range, hydraulic oil viscosity changes. |
| Material Grade | Q345B | Structural steel for auger and plow body.GB/T 1591 |
| Weight | 500–2000 kg | Affects installation and structural support. |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
| pressure: | Up to 10 bar |
| flow rate: | 10-100 m³/h |
| temperature: | -10°C to 50°C |
| slurry concentration: | Up to 60% solids by weight |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
A practical evidence checklist for RFQ preparation and supplier evaluation.
Compare the published product scope and source details, then include your specifications and quantity in an enquiry.
Manufacturer profiles associated with Transverse Spreading Auger/Plow.
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
It spreads and levels concrete horizontally across the working surface in concrete distribution systems, ensuring even distribution and preliminary leveling before final finishing.
High-strength steel and abrasion-resistant alloy steel are typical, with a material grade such as Q345B per GB/T 1591. Confirm the exact grade with the manufacturer.
Key parameters include working width (2000–6000 mm), screw diameter (200–400 mm), screw speed (30–120 r/min), spreading capacity (50–200 m³/h), leveling accuracy (±5 mm), operating pressure (1.0–1.6 MPa), hydraulic flow rate (40–100 L/min), power requirement (7.5–30 kW), operating temperature (-10–50 °C), and weight (500–2000 kg). These are reference ranges; verify for your specific model.
Check the interface dimensions, hydraulic flow rate, power requirements, and operating pressure against your system's specifications. Also confirm the material grade and standards with the legal manufacturer or supplier.
This component is essential for the following industrial systems and equipment:
Commonly used trade names and technical identifiers for Transverse Spreading Auger/Plow.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Compare manufacturer profiles with relevant product and process capability.