Editorial Technical Reference

Aluminum extrusion profile

Custom and standard aluminium extrusion profiles · Alloy series and temper (e.g. 6063-T5), circumscribing circle and weight per foot, wall and corner design rules, tolerance tables, finishing and fabrication

An aluminium extrusion profile is a length of aluminium alloy pushed through a shaped die to give a constant cross-section, used for frames, windows, rails, heat sinks and structural parts. Ask three things first: which alloy and temper, since they set strength, corrosion resistance and finish; how big and heavy the cross-section is, since that sets the press size and cost; and which tolerance standard, finish and fabrication steps apply.

Aluminium extrusion profiles — standard and custom solid, hollow and semi-hollow shapes, including architectural, industrial framing (T-slot) and solar mounting profiles, with finishing and fabrication. Extrusion billets, presses and dies, profile accessories and complete doors, windows or curtain walls are outside this page except where compared.

CNFX editorial research · Sources checked October 11, 2026 · 5 sources

Aluminum Extrusion Profile in a manufacturing environment
Representative product image. Confirm appearance and specifications with the manufacturer.

01

Choose the alloy series and temper

The Aluminum Extruders Council (AEC) describes the alloy series used for extrusions: 1xxx (at least 99% aluminium) with high corrosion resistance and conductivity but low strength; 2xxx (copper) with high strength and excellent machinability but relatively low corrosion resistance; 3xxx (manganese) with low to medium strength and good corrosion resistance; 5xxx (magnesium) with excellent marine corrosion resistance and very good weldability; 6xxx (magnesium and silicon), "Most popular extrusion alloy class", with good strength, corrosion resistance, machinability, weldability and formability; and 7xxx (zinc) with very high strength but poor corrosion resistance. 4xxx alloys are not available as extrusions. [1]

Non-heat-treatable 1xxx, 3xxx and 5xxx alloys gain strength by cold work, while heat-treatable 2xxx, 6xxx and 7xxx alloys reach the highest strength by controlled heat treatment. Typical extrusion tempers are as-extruded (no property limits), O (annealed), H112 (strain-hardened), T1 and T5 (cooled from an elevated temperature and naturally or artificially aged) and T4 and T6 (solution heat-treated and naturally or artificially aged); 6063-T5, for example, is a 6xxx alloy cooled from an elevated temperature and artificially aged. AEC notes that international alloy designations differ from US ones. [1]

Give the extruder the profile drawing with critical dimensions and tolerance standard, alloy and temper, length and cut-length tolerance, mechanical property requirements, finish (mill, anodised with class and colour, powder coat, paint, mechanical), fabrication (cutting, punching, machining, bending, welding, assembly), packaging and protection, die ownership and annual quantity.

02

Design the profile for extrusion and cost

AEC uses the circumscribing circle diameter (CCD) — the smallest circle enclosing the cross-section — as one measure of size: "Most common profiles are less than 12 inches in diameter", a few extruders reach 32 in, and "In general, extrusions are most economical when they fit within a CCD between one and ten inches", with costs falling significantly below 8 in; design is greatly helped by keeping CCD under 8 in and weight at 3 lb per foot or less. It recommends balanced walls, avoiding or minimising hollows, generous tapers, symmetry, grooves, webs and ribs, a low perimeter-to-area ratio and avoiding high tongue ratios. [2]

Its design tips classify shapes as solid, hollow or semi-hollow, ask for outside corners of at least 0.020 in and inside corners of at least 0.015 in, warn that thick-thin junctions cause distortion, die breakage or surface defects and that very thin walls are costly, and suggest ribs to help straightening and flatness and index grooves to aid drilling and identification. [3] Standard and precision dimensional tolerances are given in the Aluminum Association's Aluminum Standards & Data tables 11.5–11.14, 12.2–12.5 and 12.10–12.14, and AEC adds that "Many extruders can — if required — achieve tighter tolerances than indicated in the tables". [4] Extrusions can be left with their natural oxide film or anodised, painted or mechanically finished, and AEC's example frame member for military tents is cut to length, punched, tumble deburred, welded, powder coated and assembled. [5]

Editorial calculation: 12 in is about 305 mm, 8 in about 203 mm and 32 in about 813 mm; 3 lb/ft is about 4.5 kg/m; 0.020 in is about 0.51 mm and 0.015 in about 0.38 mm. [2] [3]

03

Compare what suppliers offer

Suppliers linked to this page list aluminium extrusion profiles; each card links to the page reviewed.

Listings include custom extrusion, door and window profiles, picture-frame and angle profiles, solar panel profiles, and T-slot framing extrusions such as 2020 and 2040 sections with accessories; ask each for press sizes and maximum CCD, alloys and tempers held, tolerance standard, finishing lines and die cost.

04

Trace the profile specification

This is a functional reference built from the sources cited; it is not one maker's specification.

ElementRoleFix in the order
AlloySets strength and corrosion. [1]Series and grade.
TemperSets final properties. [1]As extruded, O, H112, T1, T4, T5, T6.
Cross-sectionSolid, hollow or semi-hollow. [3]Drawing, CCD, wall.
TolerancesStandard or precision tables. [4]Table and class.
FinishOxide, anodise, paint, mechanical. [5]Type, colour, thickness.
FabricationCut, punch, weld, assemble. [5]Operations.

05

Fill the specification fields with values for your profile

An extrusion quotation needs values for your profile. The table explains each field, gives published values where a reviewed source states them, and says what to obtain from the supplier.

FieldWhat it means and published valuesAsk the supplier for
Alloy6xxx: "Most popular extrusion alloy class." [1]Alloy grade.
Tempere.g. 6063-T5. [1]Temper and properties.
Circumscribing circle (mm)Economical 1–10 in; under 8 in best. [2]Press capability.
Weight per metre3 lb/ft or less eases production. [2]kg/m.
Minimum corner radius0.020 in outside, 0.015 in inside. [3]Radii.
Dimensional tolerancesAluminum Association tables. [4]Standard or precision.
Surface finishAnodise, paint, mechanical. [5]Finish spec.
LengthNot stated in reviewed sources.Length and cut tolerance.

06

Send the drawing, alloy and finish together

Paste it into your enquiry below or into an email to a maker, then replace every bracket.

Profile: [drawing; CCD; wall; solid/hollow]
Alloy and temper: [e.g. 6063-T5]
Tolerances: [standard or precision; critical dimensions]
Length: [length; cut tolerance]
Finish: [anodise class/colour; powder coat]
Fabrication: [machining; punching; assembly]
Commercial: [die cost; annual quantity; packaging]

See manufacturer records Send an enquiry through CNFX

Compare aluminum extrusion profile suppliers

These companies list aluminum extrusion profiles.

Foshan Shenghai Aluminum Co., Ltd.
Manufacturing site to be confirmed for the order

Lists custom aluminium profiles including door, window and picture-frame profiles.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
SinoExtrud (Foshan Yonghang Aluminum Co., Ltd)
Manufacturing site to be confirmed for the order

Lists custom aluminium extrusion profiles including solar panel profiles.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
JMA Aluminium (Guangdong JMA Aluminium Profile Factory Group Co., Ltd.)
Manufacturing site to be confirmed for the order

Lists aluminium profiles and custom extrusions.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
Shanghai MK Aluminum Co., Ltd.
Manufacturing site to be confirmed for the order

Lists aluminium profiles.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
Wellste Aluminum
Manufacturing site to be confirmed for the order

Lists custom aluminium extrusions and 2020/2040 framing extrusions.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
Anhui Shengxin Aluminum Co., Ltd (Shengxin Aluminium)
Manufacturing site to be confirmed for the order

Lists aluminium extrusion profiles including angles.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
JLCMC
Manufacturing site to be confirmed for the order

Lists aluminium extrusion profiles and accessories in an online store.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
Lishui Hengli Automation Technology Co., Ltd.
Manufacturing site to be confirmed for the order

Lists aluminium extrusion profiles with linear motion parts.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
Moneybox
Manufacturing site to be confirmed for the order

Lists aluminium extrusion profiles for doors.

Product scope checked 2026-10-11

Current product source ↗

Aluminium profiles listed · profile compiled by CNFX from public sources
Synrise Industries (Dalian) Co., Ltd.
Dalian, Liaoning, CN
Also makes: Aluminum Die Casting
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “5050 T-Slot Aluminum Extrusion Profile”
View source page ↗ al-profile-components.com · recorded 2026-09-17
Topolo
Shanghai, CN
Also makes: Dump Truck
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “Aluminum Extrusion Profiles”
View source page ↗ topolo-truck.com · recorded 2026-09-05
Ya Ji Aluminum
Guangdong, CN
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “Aluminum-Extrusion-Profile”
View source page ↗ yajialuminum.com · recorded 2026-08-30
View All Factories

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Buyer questions

Which aluminium alloys are used for extrusions?

AEC calls 6xxx magnesium-silicon alloys the "Most popular extrusion alloy class"; 1xxx, 2xxx, 3xxx, 5xxx and 7xxx are also extruded, but not 4xxx. [1]

What does T5 or T6 mean?

T5 is cooled from an elevated temperature and artificially aged; T6 is solution heat-treated and artificially aged. [1]

What size of profile is cheapest to extrude?

AEC says "In general, extrusions are most economical when they fit within a CCD between one and ten inches" and "Profiles below 8-inches of CCD reduce costs significantly"; it also links good design to a weight of 3 lb/ft or less. [2]

Sources and what still needs a direct check

Sources checked 2026-10-11. All sources are Aluminum Extruders Council guidance pages; tolerance tables themselves are in the Aluminum Association's Aluminum Standards & Data. National standards (for example EN or GB) may govern orders elsewhere.

  1. Aluminum Extruders Council — Aluminum extrusion alloys and tempers ↗ Industry association guide Return to text ↑
  2. Aluminum Extruders Council — Key design considerations ↗ Industry association guide Return to text ↑
  3. Aluminum Extruders Council — Extrusion design tips ↗ Industry association guide Return to text ↑
  4. Aluminum Extruders Council — Aluminum extrusion tolerances ↗ Industry association guide Return to text ↑
  5. Aluminum Extruders Council — Finishing ↗ Industry association guide Return to text ↑

Still to check yourself

  • Fix alloy and temper on the drawing.
  • Check CCD and weight against the extruder's presses.
  • Name the tolerance standard and critical dimensions.
  • Specify finish and fabrication steps.
  • Verify the legal supplier and factory.
Buyer enquiry

Request manufacturing insight for Aluminum Extrusion Profile

Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.

Where it goes
Straight to the CNFX editorial desk, and to the manufacturer if this product is linked to a claimed profile. Nothing is broadcast to a supplier list.
Your details stay here
We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman
CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What to include
Share your product specifications, quantity, destination and target delivery date.

Your business information is used only to process this request.

Thank you! Your message has been sent. We'll respond within 1–3 business days.
Sorry, we couldn't send your message. Please try again, or email us at [email protected].

Need to Manufacture Aluminum Extrusion Profile?

Compare manufacturer profiles with relevant product and process capability.

Previous Product
Work Rolls
Last Product
Get QuotesChat