LED rope lights for decorative and outline lighting · mains (230 V) vs low-voltage, LEDs per metre and watts per metre, cut length, maximum run, 11 or 13 mm PVC tube, IP65, colours, approvals
An LED rope light is a string of LEDs sealed inside a flexible, clear PVC tube, sold in long reels for decorative and outline lighting. Ask three things first: whether it runs straight off mains or from a low-voltage supply, which decides safety measures and how long a run can be; the LED density, watts per metre and colour; and where it can be cut and how it is sealed and approved for outdoor use.
LED rope lights — mains-voltage and low-voltage, single-colour and multi-colour, two-wire and multi-channel — with connectors, end caps, power cords and mounting clips. LED tape and strip lights (separate page), LED neon flex, string lights with bulbs and solar lights are outside this page except where compared.
Start with your task
01
Glow-Grow Lighting, a Chinese LED decorative-lighting maker, lists its RL2-230V-24L rope light for 230 V with 24 LEDs per metre at 2.76 W per metre, a maximum run of 100 m, and a cutting length of 2.0 m; it also lists 230 V ropes at 30 and 36 LEDs per metre and in (5+1) arrangements, and two-wire ropes at 24 to 39 LEDs per metre. [1] Waveform Lighting's strip-buying guide, by contrast, describes LED strips configured for 12 or 24 V DC, fed from mains through a DC power supply. [2]
Editorial calculation: a full 100 m run at 2.76 W/m draws about 276 W — around 1.2 A at 230 V — and because the rope can only be cut every 2.0 m, runs come in 2 m steps, so plan lengths and feed points around that. [1]
Editorial note: ask the supplier which approvals cover the specific model and voltage for your market, and how cut ends and connectors are sealed and protected.
Give the supplier the supply voltage (230 V, 120 V or low-voltage), LED colour and density, watts per metre, tube diameter and shape, maximum run and feed arrangement, cut length, IP rating and UV resistance, connectors, end caps, power cord and clips, controller or chasing effects, approvals (CE, UL and others) for each market, reel length, packaging, and quantity.
02
Glow-Grow states that its rope uses high-transparency, UV-resistant, cold-resistant, non-toxic PVC in 13 mm or 11 mm diameter, special soldering to avoid flicker or dead LEDs, a construction letting the connecting wire flex freely, bending tests to control failures, a wide viewing angle for soft even light, IP65 sealing, colours red, yellow, blue, green, white, warm white, pink and purple, and CE, UL and RoHS approval. [1]
Editorial note: approval marks on a catalogue page are maker claims; ask for the certificate or listing number and check it covers the exact model, voltage and length sold.
03
American Lighting's LED Flexbrite 1/2 in rope light (ULRL-LED kits, 150 ft reels) is listed for 120 V AC at 1 W per foot, 34 lm per foot, a 36 in cut increment, a 150 ft maximum run, 360° light output, IP65 and wet-location rating for indoor and outdoor use, a rated life of 60,000 hours, and dimming from 5 to 100% with CL or ELV dimmers. The maker states the UL listing is void when the rope is cut. [3]
Set this US 120 V example beside the 230 V rope above, which is listed at 2.76 W/m with a 2.0 m cut length and a 100 m maximum run. [1] [3] Low-voltage strips need a DC supply instead. [2]
Editorial calculation: 1 W/ft is about 3.3 W/m and 34 lm/ft about 112 lm/m, so the 5000 K version gives about 34 lm/W; a full 150 ft (45.7 m) run draws about 150 W, 1.25 A at 120 V. The 36 in cut increment is about 0.91 m.
| ULRL-LED kit | CCT | CRI | Power | Lumens per foot |
|---|---|---|---|---|
| ULRL-LED-WW-KIT | 3000 K | 72+ | 1 W/ft | 32 |
| ULRL-LED-WH-KIT | 5000 K | 75+ | 1 W/ft | 34 |
Before cutting a listed rope, ask the supplier how the safety listing is kept for cut lengths, and get the maximum run and dimmer compatibility for your voltage.
04
Rope lights have their own luminaire standard. The GCC Standardization Organization's page for GSO IEC 60598-2-21:2017, approved on 3 October 2017 and adopting IEC 60598-2-21:2014, states that this part of IEC 60598 specifies requirements for rope lights (sealed lighting chains) fitted with non-replaceable series-, parallel- or series/parallel-connected light sources, for use indoors or outdoors on supply voltages not exceeding 250 V. It notes that some countries use the term “sealed lighting chain” instead of “rope light”, and that where a rope light is fixed to a frame as an ornament, relevant clauses of IEC 60598-2-4 and/or IEC 60598-2-7 can also apply. [4]
Editorial calculation: the 230 V rope above sits 20 V below the 250 V ceiling and the 120 V US rope 130 V below it, so both supply voltages fall inside the scope; because the light sources are non-replaceable, a failed section is replaced by cutting at a marked point (every 2.0 m on the 230 V rope, every 36 in on the 120 V rope) rather than by changing a lamp. Ask for a test report to IEC 60598-2-21 (or the national equivalent) that names the exact model and supply voltage. [4] [1] [3]
| Scope item (IEC 60598-2-21) | Published text | Check in the order |
|---|---|---|
| Product | Rope lights (sealed lighting chains). [4] | Standard named on test report. |
| Light sources | Non-replaceable; series, parallel or series/parallel. [4] | Cut and repair method. |
| Location | Indoors or outdoors. [4] | IP rating for outdoor use. |
| Supply voltage | Not exceeding 250 V. [4] | Rope voltage. |
| Frame-mounted ornaments | IEC 60598-2-4 and/or 60598-2-7 clauses can also apply. [4] | Decorative motifs. |
05
Suppliers linked to this page list LED rope lights; each card links to the page reviewed.
Listings include 230 V and two-wire LED rope lights at 24–39 LEDs per metre, candy-cane rope lights, LED neon flex and strip lights; ask each for watts per metre, cut length, maximum run, IP and approval documents.
06
This is a functional reference built from the sources cited; it is not one maker's design.
| Element | Role | Fix in the order |
|---|---|---|
| LEDs and wiring | 24–39 LEDs/m; 2-wire options. [1] | Density, colour. |
| PVC tube | UV- and cold-resistant; 11 or 13 mm. [1] | Diameter, material. |
| Cut points | Every 2.0 m (230 V model). [1] | Cut length. |
| Power feed | 230 V; max 100 m run. [1] | Cord, connectors. |
| Seal and approvals | IP65; CE/UL/RoHS claimed. [1] | Certificates. |
07
An LED rope light quotation needs values for your project. The table explains each field, gives published values where a reviewed source states them, and says what to obtain from the supplier.
| Field | What it means and published values | Ask the supplier for |
|---|---|---|
| Length | Max run 100 m (230 V model). [1] | Reel, max run. |
| LED density | 24–39 LEDs/m. [1] | LEDs/m. |
| Power consumption | 2.76 W/m (24 LED/m, 230 V). [1] | W/m. |
| Color temperature | Colours R/Y/B/G/W/WW/PK/PP. [1] | CCT or colour. |
| IP rating | IP65. [1] | IP report. |
| Voltage input | 230 V; strips 12/24 V DC (Waveform). [1] [2] | Voltage. |
| Operating temperature | Cold-resistant PVC claimed. [1] | Range. |
| Cutting interval | 2.0 m. [1] | Cut length. |
| Luminous flux | Not stated in reviewed sources. | lm/m. |
| CRI | Not stated in reviewed sources. | Value. |
| Bending radius | Bending test stated. [1] | Minimum radius. |
| Weight | Not stated in reviewed sources. | Per metre. |
| Cut increment and listing | Examples: 2.0 m (230 V rope); 36 in (120 V rope, UL listing void when cut). [1] [3] | Cut length; listing for cut pieces. |
08
Paste it into your enquiry below or into an email to a maker, then replace every bracket.
Supply: [230 V; 120 V; low-voltage] Light: [colour; LEDs/m; W/m] Runs: [lengths; feed points] Build: [diameter; IP; UV] Accessories: [connectors; end caps; clips; controller] Approvals: [CE; UL; other] Quantity: [metres; reels]
These companies list LED rope lights.
Lists 230 V and two-wire LED rope lights at 24–39 LEDs per metre, plus neon flex and strip lights.
Product scope checked 2026-10-11
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
One maker lists a maximum run of 100 m for its 230 V, 24 LED/m rope. [1]
Only at marked points; one 230 V model cuts every 2.0 m. [1]
The rope reviewed runs on 230 V in a round PVC tube, whereas Waveform says LED strips are configured for 12 or 24 V DC. [1] [2]
American Lighting lists its 120 V Flexbrite rope at 1 W and 32–34 lm per foot (about 105–112 lm/m), with a 150 ft maximum run and 36 in cut increment. [3]
IEC 60598-2-21 (adopted as GSO IEC 60598-2-21:2017) covers rope lights, also called sealed lighting chains, with non-replaceable light sources for indoor or outdoor use at supply voltages up to 250 V. [4]
Sources checked 2026-10-12. Glow-Grow is a rope-light maker that also appears as a supplier on this page; Waveform Lighting sells LED strips; American Lighting publishes its own rope-light specifications; the scope of IEC 60598-2-21 was read from the GCC Standardization Organization's adoption page.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
Compare manufacturer profiles with relevant product and process capability.