LED string lights (lighting chains) · Supply voltage (mains or 12/24/36 V), length, LED count and spacing, power, IP rating, cable, connectable runs, standard and certification
LED string lights are chains of LEDs on flexible cable used for decorative and festive lighting indoors and out. Ask three things first: which supply voltage and plug the target market uses, how long each run is with what LED count, spacing and colour, and what water protection, cable and certification the installation requires.
Decorative LED lighting chains (string lights, fairy and Christmas lights) on mains or low-voltage supply. Rope lights and sealed chains (IEC 60598-2-21), LED strip lights and neon flex, festoon bulbs with separate lamps, and motif or sculpture lights are outside this page.
Start with your task
01
IEC 60598-2-20:2014 specifies requirements for lighting chains fitted with series, parallel or series/parallel connected light sources for indoor or outdoor use on supply voltages not exceeding 250 V; rope lights (sealed lighting chains) are covered separately by IEC 60598-2-21. EN 60598-2-20 is cited under the EU Low Voltage Directive 2014/35/EU. [1]
Obbo Lighting describes string lights as decorative products whose buying points include cable material, LED brightness, connection, controller effects, certification and target-market voltage, with 12 V or 24 V low-voltage or 110–240 V supplies confirmed per order and market, basic protection for indoor use and IP44 or IP65 for outdoor trees and landscapes. [3]
Glow-Grow states low-voltage 24 V and 36 V versions with an IP65 power supply are available alongside its 230 V strings, and lists CE, GS and RoHS approval. [2]
Give the supplier the target market, supply voltage and plug, string length and LED count or spacing, LED colour and effects, cable type and colour, IP rating, how many sets will be linked, controller or timer, certifications required and packaging.
02
Glow-Grow lists its STR-100-10M rubber-wire string at 230 V, 10 m long with 100 LEDs at 10 cm spacing, 7.0 W, IP65, colours R/Y/B/G/W/WW/PK/PP and a maximum of 20 connected sets; it uses VDE-approved rubber cable with 0.5 mm² copper conductors, glue-filled LED caps, and states one power cord can connect up to 200 m. [2]
Editorial calculation: 7.0 W ÷ 100 LEDs = 0.07 W per LED; 20 linked sets × 10 m = 200 m, matching the stated maximum, at about 140 W in total; 140 W at 230 V draws about 0.61 A. [2]
03
The National Fire Protection Association's report Home Christmas Tree and Holiday Light Fires (M. Ahrens, NFPA USS39, November 2007), as abstracted in NIST's FireDOC library, estimates that during 2002–2005 holiday lights and other decorative lighting with line voltage were involved in an average of 240 reported US home structure fires per year. Those fires caused an average of four civilian deaths, 14 civilian injuries and $7.5 million in direct property damage per year. In the same period Christmas trees were the item first ignited in an average of 210 home fires per year, with 24 deaths, 27 injuries and $13.3 million in damage. The estimates come from the US Fire Administration's National Fire Incident Reporting System and NFPA's fire department survey. [4]
These are older US figures for line-voltage lighting, which is the supply case covered by the lighting-chain standard and the 230 V strings described above; they do not separate LED from incandescent sets. [1] [2] [4]
Editorial calculation: $7.5 million spread over 240 fires is about $31,000 of direct damage per fire, against about $63,000 per Christmas-tree fire ($13.3 million ÷ 210).
| NFPA estimate, US homes, 2002–2005 annual average | Holiday and line-voltage decorative lighting | Christmas trees (item first ignited) |
|---|---|---|
| Reported home structure fires | 240 | 210 |
| Civilian deaths | 4 | 24 |
| Civilian injuries | 14 | 27 |
| Direct property damage | $7.5 million | $13.3 million |
For mains-voltage strings, ask for the safety standard the set is certified to, the maximum number of sets that may be connected end to end, and whether a low-voltage supply is available for the location.
04
The suppliers linked to this page list LED string lights; their cards link to the pages reviewed.
Ask any supplier for the supply voltage and plug, length, LED count and spacing, power per set, maximum linked sets, cable type and conductor size, IP rating of the string and the power unit, controller functions, operating temperature, certifications for the target market and test reports.
05
This is a functional reference built from the sources cited; it is not one maker's specification.
| Part | Role | Fix in the order |
|---|---|---|
| LEDs and caps | Produce and spread light. [2] | Colour; spacing; cap. |
| Cable | Carries current; resists weather. [2] [3] | Rubber or PVC; mm². |
| Plug or power unit | Supplies mains or low voltage. [3] [2] | Voltage; IP. |
| Connectors | Link sets end to end. [2] | Maximum sets. |
| Controller | Sets effects. [3] | Modes; timer. |
06
An LED string light quotation needs values for your project. The table explains each field, gives published values where a reviewed source states them, and says what to obtain from the supplier.
| Field | What it means and published values | Ask the supplier for |
|---|---|---|
| String Length (meters) | e.g. 10 m. [2] | Length; lead cable. |
| LED Count (units) | e.g. 100 at 10 cm. [2] | Count; spacing. |
| Input Voltage (volts) | e.g. 230 V; 12/24/36 V; ≤250 V scope. [2] [3] [1] | Voltage; plug. |
| Power Consumption (watts) | e.g. 7.0 W per 10 m set. [2] | Per set. |
| IP Rating (IP code) | e.g. IP44; IP65. [3] [2] | String and power unit. |
| LED Color (K) | e.g. W, WW and colours. [2] | CCT or colour. |
| Luminous Flux (lm) | Not stated in the reviewed sources. | Value. |
| Operating Temperature (°C) | Not stated; cable described as cold-resistant. [2] | Range. |
| Wire Material | e.g. rubber, 0.5 mm² copper; PVC. [2] [3] | Cable; mm². |
| Connector Type | Linkable; up to 20 sets. [2] | Connector; limit. |
| Weight (kg) | Not stated in the reviewed sources. | Weight. |
| Safety record context | NFPA: line-voltage decorative lighting involved in about 240 US home fires a year (2002–2005). [4] | Certification and connection limit. |
07
Paste it into your enquiry below or into an email to a maker, then replace every bracket.
Market and supply: [230 V; 120 V; 24 V; plug] Run: [length; LED count; spacing] Light: [colour; effects] Protection: [IP44; IP65] Cable: [rubber; PVC; colour] Linking: [sets per run] Certificates: [CE; GS; UL]
These companies list LED string lights.
Lists rubber-wire and PVC-wire LED string lights among Christmas lights.
Product scope checked 2026-10-11
Lists LED string lights, C7/C9 strings and battery lights.
Product scope checked 2026-10-11
Lists decorative string lights.
Product scope checked 2026-10-11
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
IEC 60598-2-20 covers lighting chains for indoor or outdoor use on supplies up to 250 V; rope lights fall under IEC 60598-2-21. [1]
Glow-Grow lists up to 20 sets of its 10 m string, or 200 m from one power cord. [2]
Obbo points to IP44 or IP65 for outdoor trees and landscapes, with basic protection for indoor use. [3]
NFPA estimated that holiday and other line-voltage decorative lighting was involved in about 240 US home structure fires a year in 2002–2005, with four deaths, 14 injuries and $7.5 million in damage annually. [4]
Sources checked 2026-10-12. IEC 60598-2-20 is the international standard for lighting chains; Glow-Grow and Obbo make LED string lights.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
Compare manufacturer profiles with relevant product and process capability.