Measurement Table
View system integration details
This page explains how Table Base is classified within Machinery and Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
The foundational structural component that provides stability and support for a measurement table.
Technical details and manufacturing context for Table Base
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Load Capacity | 500–2000 kg | Uniform load; point loads may reduce capacity. |
| Table Top Size | 600×600–1200×800 mm | Custom sizes available on request. |
| Height | 750–900 mm | Adjustable height options available. |
| Flatness | ±0.05–±0.10 mm/m | Critical for measurement accuracy.ISO 1101 |
| Surface Roughness | Ra 0.8–1.6 μm | Smooth finish reduces friction and wear.ISO 4287 |
| Material | HT250 / QT500-7 | Cast iron for stability; ductile iron for higher strength.GB/T 9439 / GB/T 1348 |
| Weight | 150–500 kg | Heavier base improves vibration damping. |
| Operating Temperature | -10–50 °C | Outside range may affect dimensional stability. |
| Humidity Range | 20–80 % RH | Non-condensing; higher humidity may cause rust. |
| IP Rating | IP54–IP65 | Protects against dust and water splashes.IEC 60529 |
| Leveling Adjustment Range | ±10–±20 mm | Compensates for floor unevenness. |
| Vibration Damping | 0.5–1.0 g | Residual vibration under 10 Hz; lower is better. |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
This component is essential for the following industrial systems and equipment:
| pressure: | Static Load: Up to 5000 kg, Dynamic Load: Up to 2000 kg with vibration damping |
| other spec: | Vibration Tolerance: <5 µm RMS displacement, Leveling Accuracy: ±0.1 mm/m |
| temperature: | Standard: -20°C to 80°C, High-Temp: Up to 150°C with thermal isolation |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
2 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.
Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.
A practical evidence checklist for RFQ preparation and supplier evaluation.
CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.
The table base can be made from cast iron, structural steel, or granite composite. Each material offers different properties in terms of stiffness, damping, and thermal stability. The specific material grade, such as HT250 or QT500-7, should be confirmed with the manufacturer for the intended application.
The load capacity is typically between 500 and 2000 kg, assuming uniform load. Point loads may reduce the effective capacity. Always verify the exact capacity for your specific model and application with the manufacturer.
The base includes leveling mechanisms, such as adjustable feet, that allow a horizontal adjustment range of ±10 to ±20 mm. This compensates for floor unevenness and ensures the measurement surface is precisely aligned for accurate readings.
Relevant standards include ISO 1101 for flatness, ISO 4287 for surface roughness, GB/T 9439 or GB/T 1348 for material grades, and IEC 60529 for IP rating. These standards serve as references for verification; compliance must be confirmed with the manufacturer.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
Compare manufacturer profiles with relevant product and process capability.