Screws
Screw families for fastening and installation.
Hardware Product Explorer
Browse product families with real catalog details and open their complete technical records.
Self-Tapping Screw
A self-tapping screw is a fastener that creates its own mating thread when driven into a pre-drilled hole in materials like …
- Standards: ISO 1478
- Materials: Carbon steel (e.g., 1022, 10B21), Stainless steel (e.g., 304, 410), A…
- Thread Size: ST2.2–ST8.0 mm
15Linked manufacturer records
Wood Screw
A wood screw is a pointed fastener with a wood-forming thread and a head designed to seat against or into the workpiece.
- Standards: DIN 7997 (catalog designation)
- Materials: carbon steel, stainless steel, brass by application
- Nominal Size / Range: Supplier range; specify diameter, length, thread coverage and head form
10Linked manufacturer records
Machine Screw
A machine screw is a headed fastener with a uniform machine thread for use with a tapped hole or nut.
- Standards: ISO 7045:2011
- Materials: steel, stainless steel, brass by application
- Nominal Size / Range: M1.6–M10 for the ISO 7045 cross-recessed pan-head form
15Linked manufacturer records
Concrete Screw
A concrete screw is a hardened threaded anchor installed into a correctly drilled hole in concrete or masonry.
- Materials: hardened carbon steel, stainless steel where approved
- Nominal Size / Range: Approval-defined; state diameter, embedment and fixture thickness
7Linked manufacturer records
Self-Drilling Screw
A self-drilling screw combines a drill-point tip with a tapping thread so it can form its own pilot hole in suitable sheet m…
- Standards: ISO 15480:2019
- Materials: hardened steel, stainless steel by validated design
- Nominal Size / Range: ST2.9–ST6.3 for the ISO 15480 hex-washer-head form
16Linked manufacturer records
Drywall Screw
A drywall screw is a hardened screw with a bugle-style head and thread selected for gypsum board fastening.
- Standards: EN 14566 (application standard)
- Materials: hardened carbon steel
- Nominal Size / Range: Supplier series; specify diameter, length and framing material
7Linked manufacturer records
Chipboard Screw
A chipboard screw is a wood-based-panel fastener with a sharp point, deep thread and usually a countersunk head.
- Standards: DIN 7505 (catalog reference)
- Materials: hardened carbon steel, stainless steel by application
- Nominal Size / Range: Supplier series; specify diameter, length and thread coverage
6Linked manufacturer records
No product matches this search.
Buying guides & tools
Resources to help you specify, compare and source with confidence.