Editorial Technical Reference

LED spotlight

Recessed and adjustable LED spotlight · Beam angle and wattage for the throw, cut-out and ceiling depth, tilt, anti-glare optics, CRI, IP rating

An LED spotlight is a compact fitting that throws a concentrated, aimable beam onto art, merchandise or a feature. Ask three things first: what beam angle and wattage the mounting height and target size need, what cut-out and ceiling depth are available, and what glare control and colour rendering the space demands.

Recessed, adjustable and surface-mounted LED accent spotlights for indoor retail, hospitality and residential use. Track-mounted heads (see LED track lights), general-purpose downlights (see LED downlights), outdoor landscape and underwater spotlights, and marine searchlights are outside this page.

CNFX editorial research · Sources checked October 11, 2026 · 5 sources

LED Spotlights in a manufacturing environment
Representative product image. Confirm appearance and specifications with the manufacturer.

01

Choose the beam angle and wattage for the throw

RC Lighting describes spotlights as fittings that provide a concentrated, focused beam over a specific area, used in clothing stores, coffee shops and living rooms, and varying by beam angle, lumens and power. [3]

Fansen's FST-HY01 adjustable recessed spotlight family runs from a compact 8 W model to 80–90 W in six body and cut-out sizes, with 15°, 24°, 38° and 55° beams; it advises narrower 15° or 24° beams for focused artwork or display after confirming target size and throw distance, 38° or 55° for broader accent lighting, and states that higher wattage is not automatically better because ceiling height, surface reflectance, beam angle, spacing and target brightness must be considered together. [1]

Fansen also notes for its FST-SP-OCBL that a high wattage with a very narrow beam may over-brighten a small target, while a wide beam changes the spacing needed for even coverage. [2]

Give the supplier the ceiling height and target distance, target size and required illuminance, beam angle, wattage, CCT and CRI, cut-out and ceiling depth, tilt and rotation needs, glare limits, dimming protocol, supply voltage and certifications.

02

Fit the cut-out, ceiling depth and anti-glare optics

Fansen's FST-SP-OCBL is a recessed spotlight with a tertiary optical system and deep-set source for anti-glare, 0–30° adjustable tilt, 5, 10, 15, 25 or 35 W, 55–135 mm cut-outs, 15°, 24° or 38° beams (60° on selected models), CRI Ra≥90 or Ra≥98, IP20 and Bridgelux, Osram or Citizen LEDs; its 5 W model with a 55 mm cut-out needs at least 65 mm ceiling depth. [2]

For the FST-HY01, Fansen advises confirming that the 8 W model's 55 mm cut-out and 92 mm fixture height fit the ceiling, and checking 60 W and 80–90 W models against ceiling depth; it recommends a sample to check cut-out fit, depth, beam, light colour and glare before ordering project quantities. [1]

Editorial calculation: the OCBL power options span 7× from 5 W to 35 W; the HY01 range spans more than 10× (8 W to 80–90 W). [2] [1]

03

Read output, efficacy, life and flicker on the data sheet

Thorlux Lighting's product pages for two recessed accent spotlights show the performance lines a spotlight quotation should carry beyond beam and cut-out. Swivix has a 40° beam, 355° azimuth and 70° vertical adjustment, 970–1,045 lm, 8 W LED power and 10 W circuit power, efficacy up to 104.5 LL/CW, CRI 90+ with enhanced R9, 3000 K or 4000 K, a rated life of 50,000 hours at L70/B10, IP20, a remote gear unit, and a flicker metric of PstLM ≤1.0 and SVM ≤0.4 to IEC TR 61547-1. [4] Mina-M has a 38° beam, 355° azimuth and 60° vertical adjustment, 1,440–2,135 lm, 10–15 W LED power and 12–18 W circuit power, efficacy up to 122.1 LL/CW, CRI 90+, a rated life of 67,000 hours at L80/B10, IP20, the same flicker metric, a black anti-glare reflector bezel, replaceable control gear and an energy efficiency class E light source. [5]

Editorial calculation: circuit power minus LED power is 2 W for Swivix (10 − 8 W) and 2–3 W for Mina-M (12 − 10 W and 18 − 15 W), which is the loss in the remote gear; compare quotations on circuit power, not LED power. L70/B10 and L80/B10 are different end points, so a 50,000-hour and a 67,000-hour rating cannot be compared directly without the supplier's full lumen-maintenance data. [4] [5]

Ask suppliers such as Fansen, whose pages list wattage, beam, CRI and cut-out, to add lumen output, circuit power, rated life with its L and B values, and PstLM and SVM flicker figures. [2] [4]

Data lineThorlux SwivixThorlux Mina-MAsk the supplier for
Beam and tilt40°; 70° vertical, 355° azimuth. [4]38°; 60° vertical, 355° azimuth. [5]Beam per optic; tilt range.
Lumen output970–1,045 lm. [4]1,440–2,135 lm. [5]Luminaire lumens, not chip lumens.
LED / circuit power8 W / 10 W. [4]10–15 W / 12–18 W. [5]Circuit power with driver.
Rated life50,000 h L70/B10. [4]67,000 h L80/B10. [5]Hours with L and B values.
FlickerPstLM ≤1.0, SVM ≤0.4. [4]PstLM ≤1.0, SVM ≤0.4. [5]PstLM and SVM at full and dimmed output.

04

Compare what suppliers offer

The suppliers linked to this page list LED spotlights; their cards link to the pages reviewed.

Ask any supplier for photometric data per beam option, measured lumens and efficacy, CCT and CRI (including R9) test data, glare (UGR or cut-off angle), tilt and rotation range, cut-out and depth drawing, driver and dimming type, power factor, IP rating, rated life and certifications.

05

Trace what each part does

This is a functional reference built from the sources cited; it is not one maker's specification.

PartRoleFix in the order
LED sourceProduces the light. [2]Chip brand; CCT; CRI.
OpticsShape the beam and control glare. [2] [1]Beam; anti-glare depth.
Adjustable headAims the beam. [2] [1]Tilt; rotation.
Housing and trimFit the cut-out; remove heat. [1] [2]Cut-out; height.
DriverPowers and dims. [1]Voltage; dimming.

06

Fill the specification fields with values for your order

An LED spotlight quotation needs values for your space. The table explains each field, gives published values where a reviewed source states them, and says what to obtain from the supplier.

FieldWhat it means and published valuesAsk the supplier for
Luminous Flux (lumens)Not stated in the reviewed sources.Per model and beam.
Beam Angle (degrees)e.g. 15°, 24°, 38°, 55° (60° selected). [1] [2]Options.
Color Temperature (Kelvin)2700K–6000K. [2]CCT.
Power Consumption (watts)e.g. 5–35 W; 8–90 W. [2] [1]Wattage.
CRI (Color Rendering Index) (index)e.g. Ra≥90 or Ra≥98. [2]CRI; R9.
IP Rating (code)e.g. IP20 (recessed). [2]Rating.
Input Voltage (V AC)Confirm with the order. [1]Voltage.
Power FactorNot stated in the reviewed sources.PF.
Operating Temperature (°C)Not stated in the reviewed sources.Range.
Lifespan (h)Not stated in the reviewed sources.Life basis.
Housing MaterialNot stated in the reviewed sources.Material.
Weight (kg)Not stated in the reviewed sources.Weight.

07

Send the target, ceiling and optics data together

Paste it into your enquiry below or into an email to a maker, then replace every bracket.

Target: [size; distance; illuminance]
Beam and power: [degrees; W]
Ceiling: [cut-out; depth]
Aiming: [tilt; rotation]
Colour: [CCT; CRI]
Glare and dimming: [anti-glare; protocol]
Voltage: [V AC]

See manufacturer records Send an enquiry through CNFX

Compare LED spotlight suppliers

These companies list LED spotlights.

FANSEN Lighting
Manufacturing site to be confirmed for the order

Lists recessed, adjustable and anti-glare LED spotlights.

Product scope checked 2026-10-11

Current product source ↗

Spotlights listed · profile compiled by CNFX from public sources
RC Lighting
Manufacturing site to be confirmed for the order

Lists LED spotlights.

Product scope checked 2026-10-11

Current product source ↗

Spotlights listed · profile compiled by CNFX from public sources

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Buyer questions

Which beam angle suits artwork?

Fansen recommends narrower 15° or 24° beams for focused artwork or display, after checking target size and throw distance. [1]

Is a higher-wattage spotlight always better?

No; Fansen says ceiling height, reflectance, beam angle, spacing and target brightness must be considered together. [1]

How deep a ceiling does a small recessed spotlight need?

Fansen lists at least 65 mm ceiling depth for its 5 W OCBL with a 55 mm cut-out, and 92 mm height for its 8 W HY01. [2] [1]

What flicker and life figures should an LED spotlight sheet give?

Thorlux lists PstLM ≤1.0 and SVM ≤0.4 (IEC TR 61547-1) for its Swivix and Mina-M spotlights, with rated lives of 50,000 hours at L70/B10 and 67,000 hours at L80/B10 respectively. [4] [5]

Sources and what still needs a direct check

Sources checked 2026-10-11. Fansen Lighting and RC Lighting make LED spotlights and publish specifications and selection guidance; Thorlux Lighting's Swivix and Mina-M pages give lumen, power, life and flicker data.

  1. Fansen Lighting — Adjustable recessed LED spotlight FST-HY01 ↗ Manufacturer product page Return to text ↑
  2. Fansen Lighting — Soft beam deep anti-glare LED spotlight FST-SP-OCBL ↗ Manufacturer product specification Return to text ↑
  3. RC Lighting — LED spotlights ↗ Manufacturer product page Return to text ↑
  4. Thorlux Lighting — Swivix adjustable recessed accent spotlight ↗ Manufacturer product page Return to text ↑
  5. Thorlux Lighting — Mina-M adjustable recessed accent spotlight ↗ Manufacturer product page Return to text ↑

Still to check yourself

  • Choose beam and wattage for throw.
  • Check cut-out and ceiling depth.
  • Choose anti-glare optics and CRI.
  • Order a sample to verify.
  • Verify the legal supplier and factory.
Buyer enquiry

Request manufacturing insight for LED Spotlights

Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.

Where it goes
Straight to the CNFX editorial desk, and to the manufacturer if this product is linked to a claimed profile. Nothing is broadcast to a supplier list.
Your details stay here
We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman
CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What to include
Share your product specifications, quantity, destination and target delivery date.

Your business information is used only to process this request.

Thank you! Your message has been sent. We'll respond within 1–3 business days.
Sorry, we couldn't send your message. Please try again, or email us at [email protected].

Need to Manufacture LED Spotlights?

Compare manufacturer profiles with relevant product and process capability.

Previous Product
Wire Tensioning System
Last Product
Get QuotesChat