This page explains how Conveyor Belt System is classified within Machinery and Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
A mechanical handling system that transports materials or products from one location to another using a continuous moving belt.
Technical details and manufacturing context for Conveyor Belt System
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Belt WidthRequired | 500–2000 millimeters | Width of the conveyor belt, determining the maximum size of materials it can handleISO 15236-1 |
| Conveyor LengthRequired | 10–500 meters | Total distance the conveyor spans from start to end point |
| Belt SpeedRequired | 0.5–5.0 meters per second | Linear speed at which the belt moves, affecting throughput rateISO 5048 |
| Load CapacityRequired | 100–5000 kilograms per meter | Maximum weight the conveyor can safely carry per unit lengthISO 5048 |
| Motor PowerRequired | 5.5–250 kilowatts | Power rating of the drive motor, influencing torque and performanceIEC 60034-1 |
| Incline Angle | 0–30 degrees | Maximum angle of inclination for inclined conveyor sections |
| Operating Temperature | -20–60 °C | For standard rubber belts; special compounds for extreme temps.ISO 15236-1 |
| Belt Material | Rubber (NR/SBR), PVC, PU | Select based on material, temperature, and chemical resistance.ISO 15236-1 |
| Frame Material | Carbon steel, Stainless steel 304/316 | Stainless for food, chemical, or outdoor use.ASTM A36, AISI 304/316 |
| IP Rating | IP54–IP65 | IP65 for dusty or washdown environments.IEC 60529 |
| Voltage | 380–690 V AC | Three-phase; other voltages on request.IEC 60038 |
| Frequency | 50/60 Hz | Dual frequency for export.IEC 60038 |
| Noise Level | ≤75 dB(A) | At 1 m distance, under no-load conditions.ISO 11201 |
| Weight | 500–20000 kg | Depends on length, width, and material. |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
| pressure: | N/A (mechanical system) |
| other spec: | Max belt speed: 5 m/s, Max load capacity: 2000 kg/m, Max incline: 30° |
| temperature: | -20°C to 80°C |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
A practical evidence checklist for RFQ preparation and supplier evaluation.
Compare the published product scope and source details, then include your specifications and quantity in an enquiry.
12 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.
The official YS-CV460 uses a dual-belt design to transfer PCBs between SMT machines and to inspection and test stations. It lists PCB widths of 50–460 mm, conveying speed of 0.5–9 m/min and transfer height of 950 ± 30 mm; check edge support, direction and line layout, as these parameters do not apply to bulk or heavy logistics conveyors.
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
According to the directory reference, belt width ranges from 500 to 2000 mm, and belt speed ranges from 0.5 to 5.0 m/s. These values are indicative and must be confirmed for the specific model and application with the manufacturer.
Common standards include ISO 15236-1 for belt dimensions and ISO 5048 for calculation methods. However, compliance must be verified with the legal manufacturer or supplier, as the directory does not certify any product.
Belt materials can be rubber (NR/SBR), PVC, or PU, while frame materials are typically carbon steel or stainless steel (304/316). The choice depends on the material being handled, temperature, and chemical resistance requirements.
The reference range for the incline angle is 0 to 30 degrees. The actual maximum angle depends on the material properties and belt design, so it should be confirmed with the manufacturer.
Commonly used trade names and technical identifiers for Conveyor Belt System.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Compare manufacturer profiles with relevant product and process capability.